Cookie Img Back to top
   Call Me Free Send SMS Send Inquiry
91-261-2893899
                        Home » Products » Silicone Sealant Construction Adhesives » BOSS GP 122 Silicone Sealant

                        BOSS GP 122 Silicone Sealant

                        BOSS GP 122 Silicone Sealant
                        BOSS GP 122 Silicone Sealant
                        Send Inquiry
                        Product Code : BOSS GP 122
                        Brand Name : BOSS Silicon Sealant
                        Product Description

                        BOSS GP 122 Silicone Sealant

                        GENERAL PURPOSE APPLICATIONS.

                        BOSS  122 RTV Silicone Sealant is an one part acetoxy cure adhesive sealant that is suitable for general construction sealing and adhesive applications. This product will adhere to clean metal, glass, many types of wood, silicone resins, vulcanized silicone rubber, ceramics and plastic surfaces. A primer may be required for optimum adhesion to some substrates. Cured sealant stays rubbery from -60°F to 400°F.

                        BOSS 122 RTV silicone sealants ideally suited for sealing , glass windows, shopfront, aluminium joints, showcases, bus body building and automobiles.

                        BENEFITS:

                        • Ease of use, one-part sealant, no mixing required.
                        • Good weather ability Virtually unaffected by sunlight, rain, ozone, and temperature extremes.
                        • Long life reliability, cured sealant stays rubbery from -25 to 110°C without tearing,cracking, drying out, or becoming brittle.
                        • Wide temperature gunn ability can be applied in any season.

                        Typical Properties

                        Uncured

                        Specific Gravity

                        0.97±2

                        Colors

                        Clear, White, Black

                        Sag/Slump

                        NIL

                        Tack-Free Time

                        10-15 min

                        Cure ime at 75°F (24°C) and 50% RH (3/8 thickness)

                        24 hours

                        Extrusion Rate

                        275 g/min

                        Cured Physical


                        Elongation

                        >400%

                        Durometer Hardness, Shore A, points

                        17

                        Tensile Strength, Mpa

                        1.8

                        Dynamic Movement Capability Cycled at 1/8'' hr.,1/8min.%

                        ± 25


                        JAY AGENCIEZ
                        X