CRC Anti Spatter Spray

Product Description

• Extended nozzle life.
• Increased stability of the arc, ensuring free gas flow.
• Non-silicone heat resistant barrier.
• Long-term anti-adherent effect.
• Easy removal of welding spatter by brushing.
• Economical use, due to its thin film performance.
• Based on non-flammable solvents.
• Contains effective corrosion inhibitors to protect treated surfaces and equipment.
• Aerosols are equipped with the 360°C (upside-down) spray valve for added convenience. Pressurised with high purity CO2 , giving an active product content of over 97%.

• Nozzles and shrouds.
• Torches.
• Workpieces and parts.
• Jigs.
• Fixtures.
• Automatic and semi-automatic welding.
• Welding robots.

• Apply a thin, even film on the surfaces to be welded.
• Spray into the welding nozzle before starting and re-apply as required.
• Spatter can be wiped off with a cloth or by tapping the nozzle on the side of the bench.
• Residual product film may be removed by CRC Industrial Degreaser or CRC Fast Dry Degreaser.
• Provide normal ventilation during welding.
• A safety data sheet (MSDS) according EU directive 93/112 is available for all CRC products.

• Appearance : light amber liquid
• Specific gravity (@ 20°C) : 1,25
• Distillation range of solvent : 38-42°C
• Flash point : none
• Freezing point : < -30°C
• Vapour density (vs. air = 1) : 3
• Dry film properties
• Fire point (closed cup) : > 250°C
• Specific gravity (@ 20°C) : 0,87
• Typical film thickness : 2-5 mm

• aerosol : 12 x 500 ml
• bulk : 4 x 5 L