Cookie Img
Back to top
   Call Me Free Send SMS Send Inquiry
                              Home » Products » CRC Spray » CRC GALVA BRITE COLD GALVANISING SPRAY

                              CRC GALVA BRITE COLD GALVANISING SPRAY

                              CRC GALVA BRITE COLD GALVANISING SPRAY
                              CRC GALVA BRITE COLD GALVANISING SPRAY
                              Product Code : CRC GALVA BRITE
                              Brand Name : CRC GALVA BRITE
                              Product Description
                              GENERAL DESCRIPTION

                              Protective zinc-aluminium coating.

                              A single component, zinc-aluminium coating combining corrosion protection properties with the lustre look of aluminium. Galva Brite is a combination of zinc and aluminium powders, resins and additives, formulated to form a flexible protective film with a bright, glossy appearance.
                              • Excellent touch-up for galvanised surfaces.
                              • Provides excellent corrosion and rust resistance to ferrous metals.
                              • The galvanic properties ensure cathodic protection (the coating becomes the anode).
                              • Unique combination of flexibility and hardness.
                              • Resists rusting, peeling and fading.
                              • Adheres well to metal surfaces.
                              • Combines the galvanised look with the convenience of an aerosol application.
                              • Totally lead and chromate free.
                              • No chlorinated and low-aromatic solvents.
                              • Aerosols use dimethylether (DME) propellant for controlled spray and film properties.
                              • Fences and gates
                              • Home, garden and farm equipment
                              • Construction equipment
                              • Structural steel
                              • Guard rails
                              • Welding seams
                              • Pipes and fittings
                              • Coastal and shipborne installations
                              • Repair of LPG storage tanks
                              • Shake aerosol can very well for at least one minute after agitator ball is free. Stir or mix bulk product well to obtain a homogeneous dispersion. Repeat frequently while using.
                              • Apply to a clean, degreased, dry surface for best results. Remove rust and scale with a wire brush.
                              • Apply in light, even coats; best results are obtained with 2 lighter rather than 1 heavy coat. Additional coats can be applied after 15-20 minutes.
                              • When spraying is finished, clean aerosol valve by turning can upside down and press button until only propellant escapes. If clogging occurs, remove button and clean orifice with fine wire.
                              • Do not use on energised equipment. Use in well ventilated area.
                              • A safety data sheet (MSDS) according EU directive 93/112 is available for all CRC products.
                              TYPICAL(*) PRODUCT DATA (without propellant)
                              • Appearance : bright alu finish
                              • Resin type : modified alkyd
                              • Pigment type : zinc, leafing aluminium
                              • Specific gravity (@ 20°C)
                              • aerosol : 1,06
                              • bulk : 1,15
                              • Flash point (solvents)
                              • aerosol : -4°C
                              • bulk : 27°C
                              • Coverage (30 um, dry)
                              • aerosol : approx. 1,6 m2/can (400 ml)
                              • bulk : approx. 12 m2/kg
                              • Drying times
                              • to touch : 10-15 min
                              • to handle : 1 h
                              • complete curing : 24 h
                              • Recommended film thickness : 30-40 um
                              • Thinner / cleaner : white spirit, acetates
                              • Dry film properties (35 um on degreased metal)
                              • Salt spray (ASTM B 117) : 100 h (**) (35 um film thickness)
                              • Adhesion on steel (NFT 30038) : 0
                              • Flexibility (6 mm mandrel, visual) : pass
                              • Heat resistance (4 h @ 200°C) : slight yellowing
                              • Hardness Persoz (after 72 h) : 80 s.
                              • Solvent resistance : TBD
                              • aerosol : 12 x 400 ml
                              • bulk : 750 ml

                              JAY AGENCIEZ

                              Contact Us

                              ( *represents compulsory fields )

                              Tips on getting accurate quotes. Please include product name, order quantity, usage, special requests if any in your inquiry.