Cookie Img
Back to top
   Call Me Free Send SMS Send Inquiry
                          Home » Products » Devcon Epoxy Putties » Devcon Flexane 80 Rubber Putty

                          Devcon Flexane 80 Rubber Putty

                          Devcon Flexane 80 Rubber Putty
                          Devcon Flexane 80 Rubber Putty
                          Product Code : DFRP
                          Brand Name : Devcon
                          Product Description

                          Devcon Flexane 80 Putty

                          Description: Devcon Flexane 80 is a Trowelable urethane for repairing and lining process equipment exposed to wear, impact, abrasion, vibration, and expansion / contraction. 

                          Intended Use: Devcon Flexane 80 is a Repair and rebuild conveyor belts Line process equipment to dampen noise, Line concrete control joints. Cast flexible molds, fixtures, and parts Pot and encapsulate .Product features: Trowels on smoothly Cures to tough, medium-hard rubber (Shore 87A)

                          Devcon Flexane 80 Putty Chemical Resistance : Chemical resistance is calculated with a 7 day, room temp. cure (30 days immersion) @ 75°F)

                          1,1,1-Trichloroethane - Poor

                          Aluminum Sulfate 10% - Very good

                          Cutting Oil - Fair

                          Gasoline (Unleaded) - Poor

                          Hypochloric 10% - Very good

                          Hydro chloric 36% - Very good

                          Isopropanol - Poor

                          Methyl Ethyl Ketone - Poor

                          Phosphoric 10% - Very good

                          Potassium Hydroxide 40% - Very good

                          Sodium Hydroxide 50% - Very good

                          Sodium Hypo chlorite - Very good

                          Xylene - poor

                          TESTS CONDUCTED on Devcon Flexane 80 Putty
                          Devcon Flexane 80 Putty Tensile Strength (Urethanes) : ASTM D 412
                          Devcon Flexane 80 Putty Dielectric Strength, volts/mil ASTM D 149
                          Devcon Flexane 80 Putty Cured Hardness Shore D ASTM D 2240
                          Devcon Flexane 80 Putty Cure Shrinkage ASTM D 2566
                          Devcon Flexane 80 Putty Tear Resistance ASTM D 624
                          Devcon Flexane 80 Putty Maximum Elongation ASTM D 412

                          Surface Preparation for Application of Devcon Flexane 80 Putty : 

                          For Applying Devcon Flexane 80 Putty on METAL SURFACES, thoroughly clean area to be repaired, rebuilt, or lined with Devcon Cleaner Blend 300. Remove any oil, grease, or dirt. Roughen surface by grinding with a coarse wheel or an abrasive disc pad. To prime this surface, apply a coat of Devcon FL-10 Primer and allow to dry tack-free for 15 minutes. If the metal surface requires maximum tear resistance or is exposed to moisture, or if submerged in water, use Devcon FL-10 and Devcon FL-20 Primer.


                          For Applying Devcon Flexane 80 Putty RUBBER SURFACES, thoroughly clean area with an abrasive pad and Devcon Cleaner Blend 300. Surface can also be roughened with a grinding wheel so that it is coarse and free from oil and dirt that may clog the "pores" of the rubber. Wipe or roughen surface with Cleaner Blend 300 until the cloth no longer picks up the color of the rubber. The rubber should appear new or deeper in color. To prime this surface, apply a coat of Devcon FL-20 Primer and allow to dry tackfree for 15-20 minutes. Use DevconFL-40 Primer on "hard-to-bond" rubber surfaces as this gives ultimate peelresistance. Multiple coats may be necessary for porous rubber surfaces.For MAXIMUM ADHESION, sandblast the surface with an angular abrasive until a minimum depth profile of 2-3 mils is met. Blast to near-white finish specification SSPC-SP5 (Steel Structure Painting Council). Prime surface immediately after sandblasting to prevent oxidation.


                           


                          JAY AGENCIEZ

                          Contact Us

                          ( *represents compulsory fields )

                          Tips on getting accurate quotes. Please include product name, order quantity, usage, special requests if any in your inquiry.