Product Code : TItanium Putty Brand Name :Devcon
Devcon
PRODUCT BULLETIN
TITANIUM PUTTY
Product Description
A high performance, titanium reinforced epoxy engineered for making critical repairs to machinery and precision parts.
Features and benefits
Temperature resistance to 176 oC
Excellent chemical resistance
Compression strength of 124 MPa
Qualifies under mil spec DOD-C-24176B
Non-rusting, machinable to a metallic finish
Recommended Applications
Restore bearing housings and scored shafts
Rebuild wear rings, hydraulic rams and valves
Repair equipment and parts that require a machined finish
Typical Physical Properties: Cured 7 days @ 24 Degrees oC
Colour - Grey
Mixed Viscosity - Putty
% Solids by Volume - 100
Cured Density - 2.36 / CC
Cured Shrinkage ASTM D2566 - 0.0010 cm/cm
Specific Volume - 422 cm3 / kg
Pot life at 24oC (0.5kg mass) - 21 Minutes
Compressive Strength ASTM D695 - 129.8 MPa
Adhesive Tensile Shear ASTM D1002 -13.8 MPa
Cured Hardness Shore D ASTM D2240 - 87D
Dielectric Strength, volts / mm ASTM D149 2205
Coverage - 843 cm2 / kg @ 5mm
Temperature Resistance - Wet 66Degrees°C , Dry 177 DegreesoC
Chemical Resistance: 7 days room temperature cure ( 30 Days Immersion at 24 Degrees Centigrade )
5% Bleach (Sodium Hyprochlorite) E
5% Trisodium Phosphate E
10% Sulphuric Acid E
50% Sulphuric Acid F
10% Hydrochloric Acid E
10% Nitric Acid E
40% Nitric Acid U
Fax : 91-261-2453089/2893899
