Loctite Adhesive

Loctite 609

Loctite 609

LOCTITE 401

Instant Adhesive - general purpose. Low viscosity.

LOCTITE 638

Retaining Compound - high strength. General purpose.

LOCTITE 542

LOCTITE 495

low viscosity instant adhesive

LOCTITE 407

instant adhesive which cures very quickly when confined between two close-fitting surfaces

LOCTITE 574

Gasketing Product - general purpose.

Loctite 510 Gasketing Product

LOCTITE 510 is a high temperature resistant anaerobic sealant which cures when confined in the absence of air between close-fitting metal surfaces. Typical applications include sealing rigid flange faces on transmissions and engine casings. It ensures an instant, low-pressure seal. The product increases the torque capacity of assembled flanges.

Loctite 55 Thread Sealing Cord

LOCTITE 55 is designed for sealing of metal and plastic pipes and fittings. It needs no cure time and results in an immediate, full pressure seal. The ideal choice for a quick, easy and reliable seal. The product has approval for gas and potable water and is certified to NSF/ANSI, Standard 61.

Loctite 641 Retaining Compound

LOCTITE 641 is designed for the bonding of cylindrical fitting parts, particularly where disassembly is required for servicing operations. The product cures when confined in the absence of air between close-fitting metal surfaces and prevents loosening and leakage due to shock and vibration. Ideal for parts that need subsequent dismantling, i.e. retention of bearings on shafts and in housings.

Loctite 415 Instant Adhesive

LOCTITE 415 is a transparent, colourless, high viscosity, methyl-based instant adhesive. Well suited to metals and suitable for rubbers and plastic, it also suitable for polyolefins in combination with Primer LOCTITE SF 770 or LOCTITE SF 7239. It has a fixture time of 20 - 40 secs.

Loctite 577 Thread Sealant

LOCTITE 577 is designed for the locking and sealing of metal pipes and fittings as well as other threaded assemblies. The product provides an instant, low-pressure seal for metal pipes and fittings. It will not creep, shrink or shred. It has excellent chemical and thermal resistance and offers less migration of liquid product after application. NEW: Henkel has recently improv ed the product formulation of LOCTITE 577 providing: Higher strength on contaminated surfaces Improved thermal performance High performance on passive metals without an activator

Loctite 262 Thread locking Adhesive

LOCTITE 262 is a red, general purpose, medium to high strength, thixotropic methacrylate-based adhesive. Steel fixture time is 15 min, brass 8 min and stainless steel 180 min. It fluoresces under UV light to allow monitoring. Ideal for applications where any migration of the adhesive must be prevented. Can tolerate slight contaminations of industrial oils. Suitable for all metal fasteners.

Loctite 454 Surface Insensitive Gel

LOCTITE 454 is an instant adhesive designed for the assembly of difficult-to-bond materials which require uniform stress distribution and high tensile and/or shear strength. The product provides for the rapid bonding of a wide range of materials, including metals, plastics and elastomers. The gel consistency enables overhead and vertical application. LOCTITE 454 is also suited to bonding porous materials such as wood, paper, leather and fabric. Perfect for all quick repair jobs.

Loctite 277 Thread locker High Strength

LOCTITE 277 is a red, high strength, high viscosity, methacrylate-based threadlocking adhesive. It has a fixture time on steel of 30 min, brass 25 min and stainless steel 270 min making it deal for applications where migration of the adhesive must be prevented. Can tolerate slight contaminations of industrial oils. Suited to large threads. Fluoresces to allow monitoring.

Loctite 554 Refrigerant Thread Sealant

LOCTITE 554 is a red, methacrylate ester acrylic thread sealant liquid which provides maximum solvent resistance on threaded fittings and pipes up to 2 in (50 mm) in diameter. The sealant is used in place of specialty non-hardening compounds, litharge, glycerin and sealing tape. It is suited to temperatures up to +300.2 F (+149 C).

Loctite 596 High Temperature Red Silicone

LOCTITE SI 596 RED is a red, 1-part, flowable smooth, acetoxy silicone paste sealant. It forms a tough, flexible, waterproof, oil-resistant silicone rubber bond. It is also used as a sealant and adhesive in industrial furnaces, ovens, boilers, exhaust stacks, high temperature ducting and heating elements in electrical appliances.

Loctite 567 Thread Sealant

LOCTITE 567 is an off-white, low strength, thixotropic methacrylate thread sealant. It cures in the absence of air and by contact with metals when confined within threads up to M80/R3. It is best suited for use on coarse metal threads and its breakaway torque rating is 1.7Nm. Viscosity is 280,000 - 800,000 mPas and service temperature -55 to +150C. UL approved.

Loctite 587 Gasket Maker

LOCTITE SI 587 is a metallic blue, thixotropic oxime silicone paste used for gasketing and sealing applications in plant maintenance and various sized OEMs. As a formed-in-place gasket/sealant, it has been designed to give outstanding performance in typical automotive gasketing applications. This product is typically used in applications up to +500 F (+260 C).

Loctite 272 Thread Locker

LOCTITE 272 is a red, medium viscosity, methacrylate-based threadlocking adhesive with high strength. With a fixture time on steel of 10 min, brass 5 min and stainless steel 15 min, it is ideal for applications where any migration of the adhesive must be prevented. Can tolerate slight contaminations of industrial oils. Suitable for all metal fasteners. It has a breakaway torque on M10 bolts of 23 Nm.

Loctite 620 Retaining Compound

Loctite 270 Thread locker Permanent Strength

LOCTITE 270 is a high-strength threadlocker for maximum efficacy in the securing and sealing of bolts, nuts and studs to prevent loosening due to vibration. The product serves to permanently lock assemblies which must not come loose. It works on all metals, including passive substrates such as stainless steel, aluminium and plated surfaces. It is proven to be tolerant of minor contamination due to industrial oils, e.g. engine oils, corrosion prevention oils and cutting fluids. Can be disassembled by heating to 300C.

Loctite 222

LOCTITE 222 is a low-strength threadlocker that allows the adjustment of screws including countersunk head screws and set screws. Good on low-strength metals which could fracture during disassembly, e.g. aluminium or brass. The product works on all metals, including passive substrates such as stainless steel, aluminium and plated surfaces. t is proven to be tolerant of minor contamination due to industrial oils, e.g. engine oils, corrosion prevention oils and cutting fluids.

Loctite 263 Thread locker

LOCTITE 263 is a red high strength thread locker designed for the permanent locking and sealing of threaded fasteners. Particularly suited for heavy-duty applications such as studs into motor housings where high strength is required. High Strength Thread Sizes up to M25 180oC Service Temperature Oil Tolerant

Loctite 241 Thread locker

LOCTITE 241 is a methacrylate-based threadlocking adhesive designed for medium strength applications on small threads. Typical fixture times are 35, 12 and 240 minutes on steel, brass and stainless steel respectively. Offering low viscosity and a breakaway torque of 11.5 Nm, the product is intended for fasteners that require normal disassembly with standard hand tools.

Loctite 648 Retaining Compound

LOCTITE 648 is a green, fluorescent, low viscosity, high strength, urethane methacrylate acrylic, anaerobic retaining compound designed for bonding cylindrical fitting parts. It prevents loosening and leakage from shock and vibration. Typical applications include holding gears and sprockets onto gearbox shafts and rotors on electric motor shafts. It provides robust curing performance.

Loctite 271

Loctite Threadlocker Red 271 is designed for the permanent locking and sealing of threaded fasteners. The product cures when confined in the absence of air between close fitting metal surfaces. It protects threads from rust and corrosion and prevents loosening from shock and vibration. It is only removable once cured by heating up parts to 500F (260C).

Loctite 586

LOCTITE 586 is a high-strength sealant for the locking and sealing of metal pipes and fittings as well as other cylindrical metal assemblies. The product cures slowly and provide a high-pressure seal for metal pipes and fittings. It exhibits excellent characteristics on brass and is also suitable for copper. It will not creep, shrink or block systems by shredding.

Loctite 406 Instant Adhesive - Surface Insensitive

Instant Adhesives used for specific purpose.

Loctite 243 Thread locker

LOCTITE 243 is a general purpose threadlocker of medium bond strength. This threadlocker secures and seal bolts, nuts and studs to prevent loosening due to vibration. The product works on all metals, including passive substrates such as stainless steel, aluminium and plated surfaces. It is proven to be tolerant of minor contamination due to industrial oils, e.g. engine oils, corrosion prevention oils and cutting fluids.

Loctite 242 Thread locker

LOCTITE 242 is a medium strength, medium viscosity, methacrylate-based threadlocking adhesive offering general purpose qualities. The product provides quick fixture times on steel, brass and stainless steel of 5, 15 and 20 min respectively. LOCTITE 242 is thixotropic to prevent migration after application and is intended for fasteners that require normal disassembly with standard hand tools. Your benefits:- Medium strength Medium viscosity Quick fixture time Thixotropic to reduce adhesive migration