Crosby Grade 80 Alloy Steel Bow Shackles

Product Description

Crosby G 2130 Bolt Type Anchor Shackles Capacities 1/2 thru 85 metric tons, grade 6.

Working Load Limit and grade 6 permanently shown on every shackle.

Forged - Quenched and Tempered, with alloy pins. Hot Dip galvanised or self colored. (85, 120, and 150 metric ton shackles are all hot dip galvanised bows and the bolts are Detected and painted red)

Fatigue rated (1/2 ton - 55 Ton) Shackles 25 t and larger are RFID EQUIPPED.

Approved for use at -40 degrees C (-40 degrees F) to 204 degrees C (400 degrees F).

Meets or exceeds all requirements of ASME B30.26. Sizes 1/2 - 25t meet the performance requirements of EN13889:2003.

Shackles 55 metric tons and smaller can be furnished proof tested with certificates to designated standards, such as ABS, DNV, Lloyds, or other certification when requested at time of order.

Type Approval certification in accordance with ABS 2007 Steel Vessel Rules 1-11-17.7 and ABS Guide for Certification on Cranes available. Certificates available when requested at time of order and may include additional charges.

All 2150 shackles can meet Charpy requirements of 42 joules (31 ft-lbs) avg at -20 degree C (-4 degrees F) upon special request.

Look for the Red Pin . . . the mark of genuine Crosby quality.