Devcon Bronze Putty (BR)

Product Description

DEVCON BRONZE PUTTY BRBronze filled epoxy for repairing, rebuilding and maintaining bronze parts and equipment, Repairs cracks, dents and breaks in equipment, machinery or castings, Rebuilds parts and equipment, Rebuilds shafts, trays and chutes, Repairs to food processing equipmentDescription of Devcon Bronze Putty: Bronze filled epoxy for repairing, rebuilding and maintaining bronze parts and equipment.Recommended Applications ofDEVCON BRONZE PUTTY: Repairs cracks, dents and breaks in equipment, machinery or castings, Rebuilds parts and equipment, Rebuilds shafts, trays and chutes, Repairs to food processing equipment.Chemical Resistance for Devcon Bronze Putty7days room temperature cure (30 days) - Testing carried out 30 days immersion at 21 Degrees Centigrade.-Poor, Sodium Hydroxide 10% - Very Good, Gasoline (Unleaded) - Very Good, Sulphuric Acid 10% - Poor, Hydrochloric Acid 10% - Poor, Xylene - Very Good, Methyl Ethyl Ketone (MEK) - PoorExcellent = +/- 1% weight changeVery Good = +/- 1-10% weight changeFair = +/- 10-20% weight changePoor = > 20% weight changePRODUCT DATA of DEVCON BRONZE PUTTYTypical Physical Properties : Colour - BronzeMix Ratio by Volume 3: 1Mix Ratio by Weight 9: 1%Solids by Volume 100Pot life at 25degrees centigrade/ mins 35Specific Volume CC/Kg 447Cured Shrinkage cm/cm 0.001Specific Gravity 2.24Temperature resistance/degrees centigrade Dry 121 degrees centigradeCoverage 894cm2/Kg @ 5mmCured Hardness / Shore D 85 DDielectric Strength KV/mm 1Adhesive Tensile Shear / MPa 18Compressive Strength MPa 59Coefficient Degrees Farenheight Thermal Expansion x10-6 cm/cm/C 59.Thickness per Coat / mm As Functional Cure Time /Hours 16Mixing: Bronze Putty is formulated to be a dense mix that can be applied easily to overhead andvertical surfaces without running or sagging. Add the hardener to the resin and mix thoroughlyon a mixing board using a spatula. Do not mix in the containers.Application: For best results, product should be kept and applied at room temperature. Bronze Putty can be applied when temperatures are between 13 degrees centigrade and 52 degrees centigrade. Spread Bronze Putty over prepared surface with a putty knife. Press firmly to ensure maximum surface contact and avoid trapping air. To bridge large gaps or holes use fibreglass, sheet metal or wire mesh.