DEVCON BRONZE PUTTY BR
Bronze filled epoxy for repairing, rebuilding and maintaining bronze parts and equipment, Repairs cracks, dents and breaks in equipment, machinery or castings, Rebuilds parts and equipment, Rebuilds shafts, trays and chutes, Repairs to food processing equipment
Description of Devcon Bronze Putty: Bronze filled epoxy for repairing, rebuilding and maintaining bronze parts and equipment.
Recommended Applications of DEVCON BRONZE PUTTY: Repairs cracks, dents and breaks in equipment, machinery or castings, Rebuilds parts and equipment, Rebuilds shafts, trays and chutes, Repairs to food processing equipment.
Chemical Resistance for Devcon Bronze Putty
7 days room temperature cure (30 days) - Testing carried out 30 days immersion at 21 Degrees Centigrade.
- Poor, Sodium Hydroxide 10% - Very Good, Gasoline (Unleaded) - Very Good, Sulphuric Acid 10% - Poor, Hydrochloric Acid 10% - Poor, Xylene - Very Good, Methyl Ethyl Ketone (MEK) - Poor
Excellent = +/- 1% weight change
Very Good = +/- 1-10% weight change
Fair = +/- 10-20% weight change
Poor = > 20% weight change
PRODUCT DATA of DEVCON BRONZE PUTTY
Typical Physical Properties :
Colour - Bronze
Mix Ratio by Volume 3:1
Mix Ratio by Weight 9:1
% Solids by Volume 100
Pot life at 25degrees centigrade/ mins 35
Specific Volume CC/Kg 447
Cured Shrinkage cm/cm 0.001
Specific Gravity 2.24
Temperature resistance/degrees centigrade Dry 121 degrees centigrade
Coverage 894cm2/Kg @ 5mm
Cured Hardness / Shore D 85 D
Dielectric Strength KV/mm 1
Adhesive Tensile Shear / MPa 18
Compressive Strength MPa 59
Coefficient Degrees Farenheight Thermal Expansion x10-6 cm/cm/C 59.
Thickness per Coat / mm As Functional Cure Time /Hours 16
Mixing: Bronze Putty is formulated to be a dense mix that can be applied easily to overhead and
vertical surfaces without running or sagging. Add the hardener to the resin and mix thoroughly
on a mixing board using a spatula. Do not mix in the containers.
Application: For best results, product should be kept and applied at room temperature. Bronze Putty can be applied when temperatures are between 13 degrees centigrade and 52 degrees centigrade. Spread Bronze Putty over prepared surface with a putty knife. Press firmly to ensure maximum surface contact and avoid trapping air. To bridge large gaps or holes use fibreglass, sheet metal or wire mesh.
Devcon Titanium Putty, Devcon Plastic Steel Putty, Devcon Epoxy Putty, Plastic Steel Putty, Devcon Epoxy, Maintenance repair and Overhaul, INDUSTRIAL EPOXY PUTTIES, 180 Degrees Centigrade, ON LINE LEAK ARRESTOR, DEVCON, EPOXY PUTTY, BRUSHABLE CERAMIC, TITANIUM PUTTY, STEEL PUTTY, HIGH TEMPERATURE, RESISTANT, PUTTY, BELZONA 1111, BELZONA BRUSHABLE CERAMIC, BELOZONA EPOXY PUTTY, WURTH SILICON SPRAY, Instant Adhesive, Anti Corrosive Coating, Metal Repair Putties, Cold welding Compound, Bronze Putty, Wet Surface Putty, Abrasion Resistant Putty, Under water Putty, Devcon Plastic Steel Putty, Devcon 5 Minutes Epoxy Putty, Devcon 5 Minute Epoxy Putty, Devcon Stainless Steel Putty, Devcon Metal Magic Bond, Devcon Aluminum Putty, Machinable Putty, Easily Drilled Putty, Online Leak Arrestor, High temperature resistant leak arrestor, Marine Grade Putties, Food Grade Epoxy Putty, Devcon Plastic Steel Putty, Devcon Plastic Steel 5 Min Putty