|Home||» Products||» Devcon Epoxy Putties||» Devcon Stainless Steel Putty|
Product Code - ST
Devcon Stainless Steel Putty is A stainless steel-filled epoxy for rebuilding and repairing stainless steel equipment.
Repairs cracks, dents, and breaks in stainless steel machinery or castings; rebuilds dairy equipment; Repairs stainless steel holding tanks. Acceptable for use in meat and poultry plants.
Machinable to metallic finish. NSF Approved (Certified to ANSI/NSF61). Resistant to chemicals, most acids, bases, solvents, and alkalis.
Not recommended for long-term exposure to concentrated acids or to organic solvents.
Devcon Stainless Steel Putty Compliances: Acceptable for use in meat and poultry plants. Certified for potable water application, NSF Approved (ANSI/NSF61), 1/94
Technical data should be considered representative or typical only and should not be used for specification purposes.
Adhesive Tensile Shear - 2,385 psi
Coefficient Degrees Farenheight Thermal Expansion - 34 [(in.)°F ) ] x 10(-6)
Color Dark Grey
Compresive Strength - 8,400 psi
Coverage/lb- 50 sq.in./lb. 1/4"
Cure Time - 16 hrs
Cured Hardness -85D
Cured Shrinkage - 0.0010 in./in.
Dielectric Constant - 75
Dielectric Strength - 30 volts/mil
Flexural Strength - 5,280 psi
Mix Ratio by Volume - 3.75:1
Mix Ratio by Weight - 11:1
Mixed Viscosity - Putty
Modulus of Elasticity - 8.0 psi x 10(5) in.
Pot Life 75F - 58 min.
Recoat Time - 2-4 hrs
Solids by Volume - 100
Specific Gravity - 2.5 gm/cc
Specific Volume - 12.4 in.(3)/lb.
Temperature Resistance - Wet: 120 DegreesÃ° F; Dry: 250 Degrees Ã° F
Thermal Conductivity - 1.23 [(calx cm)/(sec x cm(2)
TESTS CONDUCTED ON DEVCON STAINLESS STEEL PUTTY
Devcon Stainless Steel Putty Compressive Strength is ASTM D 695
Cured Hardness if Devcon Stainless Steel Putty is Shore D ASTM D 2240
Dielectric Constant of Devcon Stainless Steel Putty is ASTM D 150
Modulus of Elasticity of Devcon Stainless Steel Putty is ASTM D 638
Adhesive Tensile Shear of Devcon Stainless Steel Putty is ASTM D 1002
Cure Shrinkage of Devcon Stainless Steel Putty ASTM D 2566
Dielectric Strength of Devcon Stainless Steel Putty in, volts/mil ASTM D 149
Coef. of Thermal Expansion of Devcon Stainless Steel Putty is ASTM D 696
Flexural Strength of Devcon Stainless Steel Putty is ASTM D 790
Thermal Conductivity of Devcon Stainless Steel Putty is ASTM C 177
Devcon Titanium Putty, Devcon Plastic Steel Putty, Devcon Epoxy Putty, Plastic Steel Putty, Devcon Epoxy, Maintenance repair and Overhaul, INDUSTRIAL EPOXY PUTTIES, 180 Degrees Centigrade, ON LINE LEAK ARRESTOR, DEVCON, EPOXY PUTTY, BRUSHABLE CERAMIC, TITANIUM PUTTY, STEEL PUTTY, HIGH TEMPERATURE, RESISTANT, PUTTY, BELZONA 1111, BELZONA BRUSHABLE CERAMIC, BELOZONA EPOXY PUTTY, WURTH SILICON SPRAY, Instant Adhesive, Anti Corrosive Coating, Metal Repair Putties, Cold welding Compound, Bronze Putty, Wet Surface Putty, Abrasion Resistant Putty, Under water Putty, Devcon Plastic Steel Putty, Devcon 5 Minutes Epoxy Putty, Devcon 5 Minute Epoxy Putty, Devcon Stainless Steel Putty, Devcon Metal Magic Bond, Devcon Aluminum Putty, Machinable Putty