A unique non-flammable precision cleaner for electrical- and electronic equipment. Chlorinated hydrocarbons (1,1,1-trichloroethane), chlorofluorocarbons (CFC's) and hydrochlorofluorocarbons (HCFC's) are extremely effective solvents, and replacing them is not a matter of simply "plugging-in" another solvent. Application trade-offs may need to be made and it is important that factors as :
evaporation rate
residue
flammability
flashpoint
compatibility to plastics be seriously considered.
CRC N.F. PRECISION CLEANER is the first alternative on the market that meets the highest performance characteristics :
chlorinated hydrocarbon free
CFC and HCFC free
solvent based
non-flammable
fast evaporation rate.
| Typical 1,1,1-based cleaner | Typical CFC-113-based cleaner | CRC N.F. PRECISION CLEANER |
Type of cleaner | chlorinated solvent | CFC-solvent | HFC-solvent (hydrofluorocarbon) |
Evaporation rate | fast | very fast | very fast |
Rinsing or wiping required | no | no | no |
Flammability | no | no | No* |
Residue | none | none | none |
Stains fabric | no | no | no |
Safe on plastics | no | yes | yes |
CFC and 1,1,1-tri-chloroethane free | no | no | yes |
ODP-Ozone Depleting Potential | 0,10 | 0,80 | 0,00 |
* as detailed in Typical Product Data (overleaf)
A high purity, effective, precision cleaner to meet today's environmental and safety laws
Composed of fast drying hydrofluorocarbons (HFC's) with high cleaning power
No ozone-depleting action (ODP = 0,00)
Improves the performance and reliability of electronic equipment by cleaning contacts and components quickly and effectively
Removes flux traces, light oils, finger prints and other contaminants from electrical/electronic equipment
Reduces contact resistance, arcing and wear, and thereby extending the life of sensitive equipment.
Non-conductive and non-corrosive; it evaporates completely, leaving no residue
Safe on commonly used metals, elastomers, plastics and coatings
Equipped with the 360° (upside-down) spray valve for added convenience
Low VOC -content : <10%
High dielectric strength
Specifications : - Douglas Aircraft Company CSD#1
- Boeing D6 - 17487, Revision L
CRC N. F. PRECISION CLEANER is suitable for cleaning and degreasing all types of electrical and electronic components where a shutdown is either impossible or very expensive
Relays; switches; circuit breakers; alarm and signal systems; printed circuit boards; connectors; generators, contacts; laboratory- and test equipment; terminals; plugs and jacks; electromechanical assemblies; motor controls; sensors.
Spray liberally on surface to be cleaned and allow to run off. Use extension tube for precision application.
To remove oxide and carbon deposits, use an abrasive and rinse off intermittently with CRC N. F. PRECISION CLEANER. Re-lubricate with CRC 2-26 if necessary.
It is not necessary to switch off electronic/electrical equipment during cleaning. However, it is recommended, while risk of electrical shock can occur when spraycan itself makes accidental electrical contact.
General description : Precision cleaner for electronic equipment
Flammability : No flame extension FEA 607-E
Passes drum test FEA X610-E
Plastics compatibility :
- Bellcore test results :
Noryl : pass
ABS : pass
Lexan : pass
- KB value : <30
Cleaning Power : Cleans 80% of an artificial soil based on LP-100
(CFC113 = 90%)
Evaporation : Evaporation rate 3,5 (ether = 1)
Dielectric strength : 27,3 kV (ASTM D - 877 - 87)
Density of active ingredient : 1,413
Appearance : Clear colourless liquid
aerosol : 12 x 300 ml
JAY AGENCIEZ
सर्वाधिकार सुरक्षित.(उपयोग की शर्तें) इन्फोकॉम नेटवर्क प्राइवेट लिमिटेड . द्वारा विकसित एवं प्रबंधित |