LIFTIT Electrical Chain Pulley Block Hoist 1 Ton
Approve any electric chain hoist as you want.
Rotation stability, high efficiency, labour- saving.
Small size, light weight, nice appearance.
Compact structure.
Shell:
Light aluminum alloy shell shall be adopted, which is light but hard and fit for the
use in the terrible work environment with a high heat dissipation rate and all
tightness design.
Inverse phase sequence protecting device:
It is the special electrical installation which controls the circuit not to work in case of
wiring error in the power supply.
Limit switch:
The limit switch device is installed where the weight is lifted on and off to make the
motor to stop automatically so as to prohibit the chains from exceeding for safety.
24V/36V device:
It is used to prohibit the emergencies from occurring in case of the leakage in the
switch.
Side magnetic braking device:
This device shall realise the instant break in case of the power dump.
Chain bag:
It shall be light, handsome and durable.
Chain:
The chain shall adopt the imported FEC80 ultra heat-treatable aluminium alloy
chain.
Type WBH00501SM WBH01001SM WBH01501SM WBH02001SM WBH02002SM
Capacity(t) 0.5 1 1.5 2 2
Standard Lifting Height(m) 3
Lifting Speed(m) 6.8 6.6 8.8 6.6 3.3
Lifting Motor Power(kw) 0.75 1.5 3.0 3.0 1.5
Rotation Speed(r/min) 1440
Phases 3
Voltage(v) 200-440
Frequency(Hz) 50
Chain Turns 1
Chain Specification 6.3 7.1 10.0 10.0 7.1
Test Load(t) 0.625 1.25 1.875 2.5 2.5
I-Beam(mm) 68-130 68-130 82-153 82-153 82-153
Weight Added with 1m Higher(kg) 0.81 1.1 2.3 2.3 2.
![]() |
JAY AGENCIEZ
All Rights Reserved.(Terms of Use) Developed and Managed by Infocom Network Private Limited. |