LIFTIT Magnetic lifter 2000 Kg

Product Description

Zero electricity requiredForged hook for high mechanical strength and durabilityPrecision machined assembly block in a single piece to enhance efficiencyDesigned for safety and lightweightFull proof locking system with an easy to use "on" and" off" lever3 times rated capacity factor of safety to meet the safety standards as per international standards for under the hook devicesTest certificate for safety factor from government-approved third partyNo Maintenance and Operating costNo damage to the work piece being liftedVery Compact BenefitsLifting Magnets use space more effectively. Eliminates the need to gauge and increase stacking heightAs less as one operator can move large and heavy work-piece safely and easily using Magnetic LiftersLifting Magnets save labor and time - improves productivityConstructionLIFTIT Permanent Magnet Lifters have a strong magnetic field path produced bindermagnetic materials. "On" and "Off" of the magnetic path is controlled by turning the lever manually.There are shackles on the top of Magnetic Lifter for lifting. Operating InstructionThe work piece surface(magnetic ferrous surface) and the magnet pole surface must be clean and smooth to achieve maximum efficiency. Ground and machined surface are ideal but a good clean surface on a ferrous or casting is acceptable provided a sufficiently flat area available for a good magnetic contract with the work piece There should be no air gap/inclusions between the magnet pole and the job surface Place the magnet on the ferrous surface. Unlock the lever by pulling it out and then turn it to the ON position. Once it is made ON, lock it by releasing it. For making it OFF, please follow the similar procedure. (Do not place on wooden surface OR non-magnetic surface - it will not be possible to operate Lever to ON position) Move the load smoothly,avoid shocks and collisions To place/drop the lifted material, operate the lever to the "OFF position Safety InstructionPlace the magnet on the Ferrous Surface in the "OFF position and then make it "ON. Do not make it ON without keeping it on a ferrous surfaceThe magnet is to be placed on the center, i.e. centering to the center of gravity of the load and then liftWhile handling the load, no person should be allowed in the immediate danger zoneEnsure that the lever is made "OFF after resting the load at the desired place in the balance position When Not In UseApply Grease / Oil on Magnetic Poles surface to prevent it from rusting andPlace it on a thick wooden plank to safeguard its Magnetic poles from any damages, scratches, etc. Why LIFTIT Permanent Magnetic Lifters?LIFTIT magnetic Lifters are ruggedly builtHigh Lifting Capacity with respect to size & weightWorks without Electrical PowerNo maintenance and operational costsVery easy to use - Save time & energyMade with high energy rare earth magnets (NdFeB)Mechanical Switching by turning a lever with a lockThe system against switching off accidentallyNo damage to the work piece being liftedEasily transportableReliableDimension and SpecificationModel - LIFTIT Permanent Magnetic LifterLifting Capacity - 2000 KgMax Pulling Power - 6000 KgSelf weight - 62 KgL - 360 MMB - 155 MMH - 160 MMR - 370 MM