Lifting Magnets use space more effectively. Eliminates the need to gauge and increase stacking height
As less as one operator can move large and heavy workpiece safely and easily using Magnetic Lifters
Lifting Magnets save labour and time - improves productivity
Permanent Magnet Lifters have strong magnetic field path produced by NdFeB Magnetic materials. "On" and "Off" of the magnetic path is controlled by turning the lever manually. There are shackles on the top of Magnetic Lifter for lifting.
The workpiece surface (magnetic ferrous surface) and magnet pole surface must be clean and smooth to achieve maximum efficiency. Ground and machined surface are ideal but a good clean surface on a ferrous or casting is acceptable provided a sufficiently flat area available for good magnetic contact with the work piece
There should be no air gap/inclusions between the magnet pole and the job surface
Place the magnet on the ferrous surface. Unlock the lever by pulling it out and then turn it to the position. Once it is made lock it by releasing it. For making it please follow the similar procedure. (Do not place on wooden surface OR non-magnetic surface - it will not be possible to operate Lever to position)
Move the load smoothly, avoid shocks and collisions
To place/drop the lifted material, operate the lever to the position
When not in use:
Apply Grease / Oil on Magnetic Poles surface to prevent it from rusting
Place it on a thick wooden plank to safeguard its Magnetic poles from any damages, scratches etc.
Place the magnet on the Ferrous Surface in position and then make it. Do not make it ON without keeping it on a ferrous surface
The magnet is to be placed in the centre, i.e. centring to the centre of gravity of the load and then lift
While handling the load, no person should be allowed in the immediate danger zone
Ensure that the lever is made after resting the load at desired place in balanced position