Cookie Img Back to top
   Call Me Free Offline Send SMS Send Inquiry
                    Home » Products » CRC Spray » CRC Graphite Assembly Paste + MoS2

                    CRC Graphite Assembly Paste + MoS2

                    CRC Graphite Assembly Paste + MoS2
                    CRC Graphite Assembly Paste + MoS2
                    Send Inquiry
                    Product Code : CGAP
                    Brand Name : CRC
                    Product Description

                    GENERAL DESCRIPTION

                    A universal assembly spray paste. Special sprayable paste which contains a combination of the extremely pressure-resistant solid lubricants molybdenum disulphide (MoS2 ) and graphite, stabilised in adhesive mineral oil.


                    • High load-carrying capacity reducing the appearance of the grooves when inserting components
                    • Water-repellent
                    • Good corrosion protection
                    • Oxidation resistant
                    • High thermal stability (up to 650°C)
                    • Very good adhesion
                    • Prevents seizing
                    • Prevents fretting corrosion, scuffing and stick-slip
                    • Constant ratio of starting torque to initial tension
                    • Smoothes out rough surfaces
                    • Mounting of longitudinal press fits, eg. for bolts and bearing seats
                    • Assembly of seals and screws
                    • Surface treatment of rolling and sliding bearings to improve the running-in and to extend lifetime
                    • Lubrication of guides and joints with very slow sliding movement
                    • Bearing lubricant for wheel bearings and kiln carts
                    • Lubrication of all types of open gears
                    • Running-in lubricant of new gear wheels
                    • Shake can very well till agitator ball is free
                    • Apply a thin, even layer
                    • As running-in for rolling and sliding bearings, polish the applied product with a soft cloth. Remove any excess.
                    • As running-in for new gear wheels : let the gears operate at a low speed and with a low load (eg. moving by hand) without the operating lubricant.Then fill the system with the lubricant.
                    TYPICAL(*) PRODUCT DATA
                    • Temperature range : -30°C to +650°C
                    • Load carrying capacity
                    • (four-ball welding load) (DIN 51350) : 7.000 N
                    • Flash point of aerosol : < 0°C
                    • aerosol : 12 x 400ml

                    JAY AGENCIEZ