Cookie Img
Back to top
   Call Me Free Offline Send SMS Send Inquiry
                              Home » Products » CRC Spray » CRC METAL FREE PASTE ANTI SEIZE COMPOUND

                              CRC METAL FREE PASTE ANTI SEIZE COMPOUND

                              CRC METAL FREE PASTE ANTI SEIZE COMPOUND
                              CRC METAL FREE PASTE ANTI SEIZE COMPOUND
                              Product Code : CRC METAL FREE PASTE
                              Brand Name : CRC
                              Product Description

                              1. GENERAL DESCRIPTION

                              Multi-purpose high temperature ceramic separating and mounting paste. CRC Metal Free Paste is a white, metal-free paste, based on high-tech ceramic solid lubricants and matured additives suspended in a mineral/synthetic premium grade stable oil. It is an effective anti-seize formulation for applications from -40°C up to +1.400°C, preventing metal-to-metal contact, seizing, galling and fretting corrosion.

                              2. FEATURES

                              • Contains no free metals

                              • Reduces friction and wear, even when the base oil has already evaporated

                              • High pressure and high temperature resistance

                              • Protects against burning-in, corrosion and seizing

                              • No galvanic corrosion potential

                              • Fast and easy mounting of threaded parts

                              • Facilitates disassembly of all parts exposed to high temperatures, even after prolonged use in corrosive atmospheres

                              • Stops and prevents disc brake noise and vibration

                              • Hot and cold water resistant

                              • Free from lead, copper, nickel, and their compounds

                              • Aerosol formulation does not contain chlorinated solvents and uses LPG propellant

                              3. APPLICATIONS

                              • Machines

                              • Flanges

                              • Disc brakes

                              • Cylinder heads

                              • Threaded parts

                              • Exhaust screw connections

                              • Heat exchangers

                              • Turbines

                              • Fittings

                              • Bolts, nuts, screws

                              • Plugs, shafts, bushings, splines

                              • Pipe joints

                              4. DIRECTIONS

                              • The surfaces to be treated should be clean, dry and grease-free. Wire-brush scaled parts and clean with an oil-free solvent like CRC Industrial Degreaser.

                              • A thin, even film should be applied either by spraying or by brushing.

                              • Assembled parts can slowly be put in motion.

                              • Avoid mixing with other products.

                              Test before use on plastics and rubber.

                              • Do not use on energised equipment, oxygen systems or in presence of acetylene.

                              • Use aerosol only in ventilated areas.

                              • A safety data sheet (MSDS) according EU-directive 93/112 is available for all CRC products.

                              5. TYPICAL(*) PRODUCT DATA (without propellant)

                              Appearance : homogeneous, white paste

                              Aerosol properties

                              Flash point (open cup) : < 0°C

                              Boiling range (solvent) : 40 - 65°C

                              Vapour density (vs. air = 1) : 3

                              Specific gravity (@ 20°C) : 0,88

                              Dry film properties

                              Specific gravity (@ 20°C) : 1,4

                              Flash point (open cup) : > 200°C

                              Dropping point : none

                              Penetration (ISO 2137) : 200 - 220

                              Low temperature stability : -40°C

                              Temperature resistance

                              - lubrication : 300°C

                              - anti-seize : 1400°C**

                              Hot water resistance (DIN 51807 T1, 40°C, 90°C) : 1

                              Corrosion (DIN 50021) : > 500h

                              Four Ball Wear (DIN 51350, 4) : 3800/4000 N

                              6. PACKAGING

                              aerosol : 12 x 300 ml

                              tubes : 6 x 100 g

                               




                              JAY AGENCIEZ

                              Contact Us

                              ( *represents compulsory fields )

                              Tips on getting accurate quotes. Please include product name, order quantity, usage, special requests if any in your inquiry.