Home | » Products | » BELZONA 1111NF2 | » BELZONA 1111NF2 |
BELZONA 1111NF2
An epoxy-based composite for metal repair
A 2-part repair composite for metal repair and resurfacing based on solvent-free epoxy resin reinforced with silicon steel alloy. This repair material will not corrode and resists a wide range of chemicals. It is easy to mix and apply without the need of specialist tools and can be machined using conventional tools.
Multi-purpose durable repair composite
Fully machinable using conventional tools
Application and cure at room temperature - no hot work involved
Simple mixing ratio
Reduced health and safety risks as it is solvent free
No shrinkage, expansion or distortion
Excellent adhesion to metals including stainless steel, carbon steel, aluminium, brass and copper
Will adhere to many other natural and synthetic materials including glass and wood
Outstanding corrosion resistance
Excellent chemical resistance against a wide range of chemicals
Excellent electrical insulation characteristics
Applications for Belzona 1111include:
Repair of cracks and holes on engine and pump casings, pipes, tanks and other equipment
Resurface of pitted metal surfaces
Repair of damaged shafts and hydraulic rams
In situ flange repair
High strength structural adhesive for metal bonding
Creation of irregular load bearing shims and reforming of bearing housings
Resurface of pitted metal surfaces
Repair of damaged shafts and hydraulic rams
In-situ flange repair
High strength structural adhesive for metal bonding
Creation of an irregular load bearing shims and reforming of bearing housings
Key technical data
: 15 minutes
Time to immersion service at 25 Degrees Centigrade (77 Degrees Fahrenheit) : 20 hours
Pull off adhesion (D4541 / ISO 4624) : 3,240 psi (22.33MPa) ambient cure on blasted mild steel
Compressive strength (ASTM D695) : 12,900 psi (88.9MPa) ambient cure
Temperature resistance: 93 Degrees Centigrade (200 Degrees Fahrenheit) immersed, 200 Degrees Centigrade (392 Degrees Fahrenheit) dry
Bonds to: Aluminium, copper, steel, stainless steel, cast iron, lead, glass, wood and many more
Typical applications: Bonding, shimming, filling, gluing, patch repairs and many more