CRC Galva Brite Cold Glavanising Zinc Spray

Product Description

GENERAL DESCRIPTION

Protectivezinc-aluminium coating.

A single component,zinc-aluminium coating combining corrosion protection 

properties with thelustre look of aluminium. Galva Brite is a combination

of zinc andaluminium powders, resins and additives, formulated to form

a flexibleprotective film with a bright, glossy appearance.

FEATURES

Excellent touch-upfor galvanised surfaces.

Provides excellentcorrosion and rust resistance to ferrous metals.

The galvanicproperties ensure cathodic protection (the coating becomes the anode).

Unique combinationof flexibility and hardness.

Resists rusting,peeling and fading.

Adheres well tometal surfaces.

Combines thegalvanised look with the convenience of an aerosol application.

Totally lead andchromate free.

No chlorinated andlow-aromatic solvents.

Aerosols usedimethylether (DME) propellant for controlled spray and film properties.

APPLICATIONS

Fences and gates

Home, garden andfarm equipment

Constructionequipment

Structural steel

Guard rails

Welding seams

Pipes and fittings

Coastal andshipborne installations

Repair of LPGstorage tanks

DIRECTIONS

Shake aerosol canvery well for at least one minute after agitator ball is free.

Stir or mix bulkproduct well to obtain a homogeneous dispersion. Repeat frequently while using.

Apply to a clean,degreased, dry surface for best results. Remove rust and scale with a wirebrush.

Apply in light,even coats; best results are obtained with 2 lighter rather than 1 heavy coat.

Additional coats canbe applied after 15-20 minutes.

When spraying isfinished, clean aerosol valve by turning can upside down and

press button untilonly propellant escapes. If clogging occurs, remove button and clean orificewith fine wire.

Do not use onenergised equipment. Use in well ventilated area.

A safety data sheet(MSDS) according EU directive 93/112 is available for all CRC products.

TYPICAL PRODUCTDATA

(withoutpropellant)

Appearance : brightalu finish

Resin type :modified alkyd

Pigment type :zinc, leafing aluminium

Specific gravity (20C)

aerosol : 1,06

bulk : 1,15

Flash point(solvents)

aerosol : 4 C

bulk : 27 C

Coverage (30 um,dry)

aerosol : approx.1,6 m2/can (400 ml)

bulk : approx. 12m2/kg

Drying times

to touch : 10-15min

to handle : 1 h

complete curing :24 h

Recommended filmthickness : 30-40 um

Thinner / cleaner :white spirit, acetates

Dry film properties(35 um on degreased metal)

Salt spray (ASTM B117) : 100 h (35 um film thickness)

Adhesion on steel(NFT 30038) : 0

Flexibility (6 mmmandrel, visual) : pass

Heat resistance (4h  200C) : slight yellowing

Hardness Persoz(after 72 h) : 80 s.

Solvent resistance: TBD

PACKAGING

aerosol : 12 x 400ml

bulk : 750 ml